Side Chair
Original OwnerOriginally owned by the
Churchill family
(American)
Furniture MakerMade by
Unknown
Date1805-1830
MediumMaple, ash, rush
DimensionsPrimary Dimensions (overall height x width x depth): 39 1/4 x 19 1/8 x 15in. (99.7 x 48.6 x 38.1cm)
ClassificationsFurniture
Credit LineBequest of George Dudley Seymour
Object number1945.1.1156.2
DescriptionMaple side chair in the Queen Anne, or late baroque, style, with a yoke-shaped crest rail, a banister-back, turned stiles, legs, and stretchers, and a rush seat. The back of the chair is formed by a crest rail atop two stiles. The undulating top edge of the crest rail is arched in the center, and has an angular ear at each end. The bottom edge of the crest rail is arched. Centered below the crest rail are five slender spindles which attach at the bottom to the stay rail; the spindles are angled slightly. Above the seat, each stile is turned with baluster, ring, and cylinder forms. Below the seat, each stile forms a cylindrical back leg with a tapered foot. Each front leg is turned with three cylindrical sections, each separated by double ring form turnings, over a tapered ankle and disc-shaped foot. Each front leg extends slightly higher than the rush seat, which is trapezoidal in shape. The front stretcher is turned with double-baluster-and-ring forms. Each side has two plain turned stretchers connecting the legs; there is one plain turned stretcher in the back.
Condition: A circular area of wood is gouged out of the back of the lower left leg. The frame is refinished, and the rush seat is replaced.
Design and Construction Details: The crest rail is supported by tenons at the top of each stile; each of these joints is secured with a wooden pin through the crest rail. The banisters are tenoned into the crest rail above and into the stay rail below. The stay rail is tenoned into each stile. Each seat rail is bladelike, with a rounded outer edge and a tapered inner edge. The front stretcher is tenoned into the front legs. The seat rails and the side and back stretchers are tenoned into the front or back legs. Faint grooves circle the stiles and the front legs, marking the placement of the stay rail, seat rails, and stretchers.
Condition: A circular area of wood is gouged out of the back of the lower left leg. The frame is refinished, and the rush seat is replaced.
Design and Construction Details: The crest rail is supported by tenons at the top of each stile; each of these joints is secured with a wooden pin through the crest rail. The banisters are tenoned into the crest rail above and into the stay rail below. The stay rail is tenoned into each stile. Each seat rail is bladelike, with a rounded outer edge and a tapered inner edge. The front stretcher is tenoned into the front legs. The seat rails and the side and back stretchers are tenoned into the front or back legs. Faint grooves circle the stiles and the front legs, marking the placement of the stay rail, seat rails, and stretchers.
Status
Not on view
Object/Object