Side Chair
Furniture MakerMade by the shop of
Eliphalet Chapin
(American, 1741 - 1807)
Original OwnerOriginally purchased by
Ebenezer Grant
(Anglo-American, 1706 - 1797)
Original OwnerOriginally owned by
Ann Grant
(American, 1748 - 1838)
Original OwnerOriginally owned by
Reverend Dr. John Marsh
(American, 1742 - 1821)
Date1775
MediumCherry, green moreen wool, brass nails
DimensionsPrimary Dimensions (overall height x width x depth): 38 7/16 x 23 1/2 x 21 9/16in. (97.6 x 59.7 x 54.8cm)
ClassificationsFurniture
Credit LineGift of Frederick K. and Margaret R. Barbour
DescriptionCherry side chair in the Chippendale, or rococo, style, with a scalloped crest rail, a pierced, vase-shaped splat, cabriole front legs over claw-and-ball feet, and over-the-rails upholstery. The back of the chair is formed by a crest rail atop two stiles. The crest rail has a ribbed shell in the center, flanked by a cyma curve, or S-curve, and a ribbed ear. Centered below the crest rail is a pierced, vase-shaped splat, with interlocking C-scrolls and smaller carved scrolls; the front of the splat is carved to add depth to the overlapped shapes. The splat is joined at the bottom to a tapered splat shoe, just above the back seat rail. Above the seat, each stile is slanted back. Below the seat, each stile forms a cylindrical back leg that is slanted toward the center back of the chair. The seat is trapezoidal, with over-the-rails green moreen wool upholstery (replaced). The upholstery is secured with a line of brass nails along the bottom and side edges of the front and side seat rails. Each cabriole front leg extends from the height of the seat down to a claw-and-ball foot. Two knee brackets are located at the top of each front leg, where the leg joins the front or side seat rail; the diagonal edge of each knee bracket is shaped with a cyma curve.
Condition: The chair frame has been disassembled; the joints have been repaired and re-glued. The leftmost tip of the splat is replaced. The top center of the splat has a split that extends down through the center and lower sections of the splat. The top and bottom edges of the seat rails are repaired. The furthest projecting points of the knees are dented and lightly gouged. The frame is refinished; the finish has since been touched up. The chair is reupholstered.
Design and Construction Details: The crest rail is supported on a tenon at the top of each stile. Above the seat, the back of each stile is rounded. The splat is tenoned into the crest rail. The lower center section of the back of the crest rail is a separate piece and is glued in place. The splat is tenoned into the back seat rail. The splat shoe is nailed down onto the back seat rail; it has a cut-out to accommodate the bottom of the splat. The lower edge of the front and side seat rails has an elongated horizontal section in the center, flanked by a semi-circular downward curve and a horizontal section where the rail meets the leg. The back seat rail is tenoned and double pinned into the stiles. Each side seat rail is tenoned through the stile; each of these joints is secured with two small wedges of wood inserted into the back of the tenon. The joints at the top of the front legs are covered by the upholstery. The knee brackets are nailed to the underside of the front or side rail and to the sides of the knees. The back interior corners of the seat frame have triangular corner blocks nailed in place; the lower edge of each of these corner blocks is shaped to accommodate the shape of the seat rails. The front interior corners of the seat frame each have a vertical glue block and a triangular corner block nailed in place.
Upholstery (replaced). The chair is upholstered with green moreen wool that is held in place over the rails with a row of brass nails along the bottom and side edges of the front and side seat rails (following the original nailing pattern). Additional tacks holding the upholstery in place are located on the underside of the front and side seat rails. Below the green wool is stuffing, sackcloth, canvas webbing, and a wooden frame.
Please see attached essay by the Chapin authority, Dr. Thomas P. Kugelman for more information about this piece.
Condition: The chair frame has been disassembled; the joints have been repaired and re-glued. The leftmost tip of the splat is replaced. The top center of the splat has a split that extends down through the center and lower sections of the splat. The top and bottom edges of the seat rails are repaired. The furthest projecting points of the knees are dented and lightly gouged. The frame is refinished; the finish has since been touched up. The chair is reupholstered.
Design and Construction Details: The crest rail is supported on a tenon at the top of each stile. Above the seat, the back of each stile is rounded. The splat is tenoned into the crest rail. The lower center section of the back of the crest rail is a separate piece and is glued in place. The splat is tenoned into the back seat rail. The splat shoe is nailed down onto the back seat rail; it has a cut-out to accommodate the bottom of the splat. The lower edge of the front and side seat rails has an elongated horizontal section in the center, flanked by a semi-circular downward curve and a horizontal section where the rail meets the leg. The back seat rail is tenoned and double pinned into the stiles. Each side seat rail is tenoned through the stile; each of these joints is secured with two small wedges of wood inserted into the back of the tenon. The joints at the top of the front legs are covered by the upholstery. The knee brackets are nailed to the underside of the front or side rail and to the sides of the knees. The back interior corners of the seat frame have triangular corner blocks nailed in place; the lower edge of each of these corner blocks is shaped to accommodate the shape of the seat rails. The front interior corners of the seat frame each have a vertical glue block and a triangular corner block nailed in place.
Upholstery (replaced). The chair is upholstered with green moreen wool that is held in place over the rails with a row of brass nails along the bottom and side edges of the front and side seat rails (following the original nailing pattern). Additional tacks holding the upholstery in place are located on the underside of the front and side seat rails. Below the green wool is stuffing, sackcloth, canvas webbing, and a wooden frame.
Please see attached essay by the Chapin authority, Dr. Thomas P. Kugelman for more information about this piece.
Object number1959.8.2
On View
Not on view