Skip to main content
2007.4.1.54a
Whistles in Bag
2007.4.1.54a

Whistles in Bag

Original Owner (American, 1836 - 1902)
Maker (American, 1836 - 1902)
Date1858
MediumWhistles (.a-.c): Soldered white metal (probably tin); whistle (.b) also includes brass. Bag (.d): Hand-stitched purple fabric.
DimensionsComponent (height x width x depth of whistle .a): 1 1/2 x 1 5/8 x 11/16in. (3.8 x 4.1 x 1.7cm) Component (height x width x depth of whistle .b): 2 x 2 1/4 x 1 3/8in. (5.1 x 5.7 x 3.5cm) Component (height x diameter of whistle .c): 3 x 1 1/2in. (7.6 x 3.8cm) Component (height x width of bag .d): 6 1/8 x 3 1/4in. (15.6 x 8.3cm)
ClassificationsEquipment
Credit LineThe Newman S. Hungerford Museum Fund
Object number2007.4.1.54a-d
DescriptionThree small whistles of varying shapes and sized, in a purple fabric bag.

Whistle (.a) is shaped like a teapot with a domed lid with a finial on top. The rectangular handle has a C-scroll at the bottom; the top and bottom of the handle attach to the bottom of the teapot. Opposite the handle, a long, cylindrical piece of metal attaches diagonally to the bottom of the teapot. The piece has a narrow slit at the top end, and an air hole cut in the top side. A narrow support bar attaches horizontally between the cylindrical metal piece and the side of the teapot. There is a pin-sized hole in the top of the whistle near the handle, where the lid of the teapot meets the rim. Both sides of the teapot are decorated with a flower on a stem; the underside has a similar flower, without the stem, inside a double circular border. Dots and rope work decorate the long, cylindrical portion of the whistle.

Whistle (.b) is made of four pieces of metal soldered together. The main body of the whistle is a cylindrical piece of white metal with a brass thimble soldered on top. A handle is formed of a thin strip white metal that is soldered to the bottom of the cylinder, then curves up, out, and around, where it is soldered again to the bottom of the thimble. The fourth piece of metal is a hollow brass cylinder soldered diagonally to the bottom of the cylinder that forms the main body. The fourth piece of metal has an air hole about midway down its length; much of this piece is covered with solder. The top of the thimble has a small hole poked through it.

Whistle (.c) is a white metal cylinder that tapers slightly from the top down to a wide, flat, foot. Toward the top of the whistle, there are two decorative rings, one over the other.

Bag (.d) is made of hand-stitched purple fabric. A single piece of fabric was folded in half, then stitched along the bottom and up one side. The top opening of the bag is not finished with a hem.
Status
Not on view
International Silver Company
about 1928
Thomas Danforth Boardman and Sherman Boardman
1820-1830
1964.61.0  Photograph by Gavin Ashworth.  © 2009 The Connecticut Historical Society.
Ward & Bartholomew
1804-1809
H. B. Ward & Co.
1850-1870
Museum purchase, 1965.86.1  © 2011 The Connecticut Historical Society.
Hiram Yale & Co.
1824-1835
Ammunition Loading Tools and Original Box
Bridgeport Gun Implement Co.
Teapot
1800-1820
Teapots
Andrew Stevenson
1816-1830